Booklet Holder Problem

ceczerwonka · 01-22-2013, 11:14 PM

Ordered some booklet holders and they worked except for one booklet.

This Bears booklet doesn't quite fill the whole space but not a problem since it does fit.

Here is the problem. I have two Five Star booklets. One pc and another. Both are from the same year, but only one fits in the holder.

The Benn fits great, but the six signature is slightly bigger. Is there another ultra pro style holder available the is just a little bigger?

ivbaseball06 · 01-22-2013, 11:28 PM

Is it too thick, too long, or too wide?

ceczerwonka · 01-22-2013, 11:32 PM

It is too long (left to right)

phinzphan1372 · 01-23-2013, 06:03 AM

you can get top loaders and put thick card sleeves over both sides.... not the same but it will protect

check out the thomas cards on the bottom shelf.

viking118480 · 01-23-2013, 06:41 AM

You could try to get the spine to soften up a bit so that there is slight give to it left to right. Open and close it a handful of times. It doesn't seem any longer than the other card, and if it is, it's just by a hair.

GOWIFB · 01-23-2013, 09:41 AM

Unfortunately it might be just miscut by topps and that is the reason that you cannot fit it. I have actually seen that problem happen with just regular cards when trying to put them in a magnetic holder. If even a millimeter or two miscut they may not fit. So you will probably just have to bite the bullet on that booklet and put sleeves and toploaders on both ends of it rather than putting it in the magnetic

phinzphan1372 · 01-23-2013, 11:58 AM

Quote:

Originally Posted by GOWIFB

Unfortunately it might be just miscut by topps and that is the reason that you cannot fit it. I have actually seen that problem happen with just regular cards when trying to put them in a magnetic holder. If even a millimeter or two miscut they may not fit. So you will probably just have to bite the bullet on that booklet and put sleeves and toploaders on both ends of it rather than putting it in the magnetic

no dont put loaders on each end!!!!!! get the booklet TopLoaders like in my oic .... they have the Daniel Thomas Playbooks in em.... just purt 2 sleeves ... 1 on each end before putting them into the loaders.

Better pic of booklet top loaders... only like 50 cents each

GOWIFB · 01-24-2013, 12:57 AM

Quote:

Originally Posted by phinzphan1372

no dont put loaders on each end!!!!!! get the booklet TopLoaders like in my oic .... they have the Daniel Thomas Playbooks in em.... just purt 2 sleeves ... 1 on each end before putting them into the loaders.

Better pic of booklet top loaders... only like 50 cents each

Oh wow this is cool. I didnt know that they were making booklet toploaders, thought they were only making magnetics. Definately go off this guys suggestion

ryan_cards · 01-24-2013, 01:02 AM

Now when someone makes a penny sleeve for that I'll be impressed lol

phinzphan1372 · 01-24-2013, 07:07 AM

Quote:

Originally Posted by ryan_cards

Now when someone makes a penny sleeve for that I'll be impressed lol

The do... They hold tickets and odd size cards like the draft day toppers.

Astronix · 01-24-2013, 07:18 AM

There is a guy on ebay, hardball34, that makes custom plexiglass booklet holders. If you give dimensions he could make one that fits the card. He also makes vertical booklet cases, which are impossible to find.

wingah · 02-20-2013, 09:17 PM

Where can you find the booklet toploaders like in te pic?

ceczerwonka · 02-20-2013, 10:19 PM

Quote:

Originally Posted by Hardball34

Booklet card holder, Panini Playbook items in Booklet card store on eBay!

Check these booklet cases out that I make and sell super thick!!
Thanks for the probs Astronix.

PM sent to you.

Quote:

Originally Posted by wingah

Where can you find the booklet toploaders like in te pic?

The ones in my pictures were bought from Blowout here:

Ultra Pro Booklet 187mm Magnetic Card Holder w/Stand - 82834 - $7.99 : Blowout Cards - Sports Cards and Trading Cards Wholesale Online Store

wingah · 02-20-2013, 11:33 PM

Quote:

Originally Posted by ceczerwonka

PM sent to you.

The ones in my pictures were bought from Blowout here:

Ultra Pro Booklet 187mm Magnetic Card Holder w/Stand - 82834 - $7.99 : Blowout Cards - Sports Cards and Trading Cards Wholesale Online Store

Thanks but i was talking about the ones that Phinzphan had up

01-22-2013, 11:14 PM	#1 (permalink)
ceczerwonka Member Join Date: Oct 2007 Posts: 3,197	Booklet Holder Problem Ordered some booklet holders and they worked except for one booklet. This Bears booklet doesn't quite fill the whole space but not a problem since it does fit. Here is the problem. I have two Five Star booklets. One pc and another. Both are from the same year, but only one fits in the holder. The Benn fits great, but the six signature is slightly bigger. Is there another ultra pro style holder available the is just a little bigger?

01-22-2013, 11:28 PM	#2 (permalink)
ivbaseball06 Member Join Date: Jan 2012 Location: Columbus, Ohio Posts: 1,991 ivbaseball06	Is it too thick, too long, or too wide? __________________ Ohio State Buckeyes Supercollector! Photobucket: www.tinyurl.com/ivbaseball06 Wantlist: http://i.imgur.com/xkUmH.png Buckeyes PC: (5) 1/1 Autos, (514) Autos, (41) GU/Patches, (91) RC/Inserts/Parallels

01-23-2013, 06:41 AM	#5 (permalink)
viking118480 Member Join Date: Oct 2012 Posts: 137 viking118480	You could try to get the spine to soften up a bit so that there is slight give to it left to right. Open and close it a handful of times. It doesn't seem any longer than the other card, and if it is, it's just by a hair. __________________ Need 1991 Star Pics Mo Lewis Auto to complete collection! http://s687.photobucket.com/albums/vv236/viking118480/Jets%20Autos/ Bucket FS/FT: http://s687.photobucket.com/albums/vv236/viking118480/For%20Trade%20or%20For%20Sale/

01-23-2013, 09:41 AM	#6 (permalink)
GOWIFB Member Join Date: Mar 2010 Posts: 903	Unfortunately it might be just miscut by topps and that is the reason that you cannot fit it. I have actually seen that problem happen with just regular cards when trying to put them in a magnetic holder. If even a millimeter or two miscut they may not fit. So you will probably just have to bite the bullet on that booklet and put sleeves and toploaders on both ends of it rather than putting it in the magnetic __________________ Collecting 2007 Sweet Spot Classic Patches and anything Wisconsin! My photobucket: http://s451.photobucket.com/albums/qq239/GOWIFB/

01-24-2013, 07:18 AM	#11 (permalink)
Astronix Member Join Date: Feb 2012 Location: Houston, TX Posts: 1,200 astronixcards astronix	There is a guy on ebay, hardball34, that makes custom plexiglass booklet holders. If you give dimensions he could make one that fits the card. He also makes vertical booklet cases, which are impossible to find. __________________ My ebay store is my bucket. Always considering trades/offers.

01-22-2013, 11:32 PM	#3 (permalink)
ceczerwonka Member Join Date: Oct 2007 Posts: 3,197	It is too long (left to right)

01-23-2013, 06:03 AM	#4 (permalink)
phinzphan1372 Member Join Date: Oct 2012 Posts: 187 ajna1	you can get top loaders and put thick card sleeves over both sides.... not the same but it will protect check out the thomas cards on the bottom shelf.

01-24-2013, 01:02 AM	#9 (permalink)
ryan_cards Banned Join Date: Dec 2012 Location: Indiana Posts: 404 Ryan_Cards	Now when someone makes a penny sleeve for that I'll be impressed lol

02-20-2013, 09:17 PM	#12 (permalink)
wingah Member Join Date: Aug 2012 Location: Maine Posts: 563	Where can you find the booklet toploaders like in te pic? __________________ http://s1230.photobucket.com/albums/ee488/wingah/ Rob Gronkowski RC collection 34/36 Any help is appreciated!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode